INSTALLATION
6-38 EPT024619 Issue 1 June 2016
Set the Print Resolution (DPI)
The procedures below, describe how to set the print resolution (DPI).
Increasing the print resolution will increase print quality but will decrease
the maximum print speed.
Using the Wireless USB Keyboard
To set the print resolution using the wireless USB keyboard:
(1) From the main menu, highlight Settings.
(2) Press the Enter button.
(3) Move the cursor to highlight Resolution.
(4) Press the Enter button.
(5) Move the cursor to highlight the required resolution:
• 300x300 DPI
• 300x150 DPI
• 300x100 DPI
(6) Press the Enter button.
(7) Press ESC to return to the main menu.
Using a PC
To set the print resolution using a PC:
(1) Open the Domino G20i software.
(2) Open the Printer Control menu.
(3) Select the Resolution DPI drop-down menu.
(4) Select the required resolution:
• 600x600
• 600x300
• 600x150
• 600x100
• 300x300
• 300x150
• 300x100
To Next Page
Loading...
