OPERATION
EPT024619 Issue 1 June 2016 3-5
START UP
Using the Wireless USB Keyboard
WARNING: Eye protection must be worn.
To start up the G20i using the wireless USB keyboard:
(1) Insert the USB keyboard receiver into the USB keyboard slot on the
G20i.
(2) Turn the keyboard on, using the on/off switch on the back of the
keyboard.
(3) Turn the printer on, using the in-line switch on the power adapter.
(4) Insert an ink cartridge into the G20i. See “Ink Cartridge Installation”
on page 6-14
To Next Page
Loading...
Need help?
General
