OPERATION
3-22 EPT024619 Issue 1 June 2016
Logo
Up to 4 logos can be saved in the printer’s internal memory and made
available to insert in a message design.
To update the 4 saved logos: See “Updating Logos” on page 3-66.
To insert a logo into the message design:
(1) Whilst creating a new message, place the cursor where the logo
should appear.
Note: If printing multiple lines of text, position the cursor on the
bottom line. This ensures that the logo will be fully printed.
(2) Press the Insert button on the keyboard.
(3) Move the cursor to highlight Logo.
(4) Press the Enter button.
(5) Move the cursor to highlight the desired logo.
(6) Press the Enter button.
To Next Page
Loading...
