INSTALLATION
6-50 EPT024619 Issue 1 June 2016
Set Password Protection
The G20i can be password protected to prevent an unauthorised user
accessing the printer settings.
Notes: (1) By default the G20i’s password protection is disabled.
(2) The default password is: 1234567890.
(3) A password can be up to 10 alphanumeric characters in length.
(4) A wireless USB keyboard is required to set password
protection.
To set the password protection:
(1) From the main menu, highlight Settings.
(2) Press the Enter button.
(3) Move the cursor to highlight Password.
(4) Press the Enter button.
(5) Move the cursor to highlight Active.
(6) Press the Enter button.
(7) Enter the old password.
(8) Press the Enter button.
(9) Enter the new password.
(10) Press the Enter button.
(11) Retype the new password
(12) Press the Enter button.
(13) Press ESC to return to the main menu.
To Next Page
Loading...
