OPERATION
3-8 EPT024619 Issue 1 June 2016
Using an Android Device
WARNING: Eye protection must be worn.
To start up the printer using an Android device:
(1) Insert the USB keyboard receiver into the USB keyboard slot on the
G20i.
(2) Turn the keyboard on using the on/off switch on the back of the
keyboard.
(3) Turn the printer on using the in-line switch on the power adapter.
(4) Insert an ink cartridge into the G20i. See “Ink Cartridge Installation”
on page 6-14
(5) From the printer’s main menu, highlight Settings.
(6) Press the Enter button.
To Next Page
Loading...
