OPERATION
EPT024619 Issue 1 June 2016 3-57
Logo
Up to 4 logos can be saved in the printer’s internal memory, and made
available to insert into a message design.
To update the 4 saved logos: See “Updating Logos” on page 3-66.
To insert a logo into the message design:
(1) Place the cursor where the logo is required.
(2) Select the Logo icon.
(3) Select the Logo number from 1 to 4.
(4) Select Insert to confirm the logo selection and return to the Message
Designer.
To Next Page
Loading...
Need help?
General
