INSTALLATION
6-26 EPT024619 Issue 1 June 2016
Alarm Beacon Connection
CAUTION: Turn off the G20i and disconnect the power before
making any wiring connections.
An alarm beacon can be connected to allow operators to monitor the
printer’s status from a distance.
Power: 12V
Beacon Signal Explanation
Red There is a fault, printer has stopped.
Amber The printer requires attention.
Green The printer is printing or is ready to print.
Alarm
Beacon
Extended
Port
Alarm Beacon to Printer Wiring Diagram
+12V
9
5
15
12
Green
Red
Amber
To Next Page
Loading...
