OPERATION
EPT024619 Issue 1 June 2016 3-41
Serial Number
To insert a serial number into the message design:
(1) Click on the Serial Number icon.
(2) Click in the message design area where the serial number is required.
(3) The Serial Number window will now open. Use the settings in the
Serial Number window to define the serial number value:
Setting Name Explanation
Increase From For an ascending serial number, enter the start value
for serial number to increase from.
Decrease From For a descending serial number, enter the start value
for serial number to decrease from.
Step Enter the number of steps the serial number should
count in.
For example, if the Step value is set to 5, the serial
number will count in the sequence:
5, 10, 15, 20, etc.
Repeat Enter the number of times the serial number should
be repeated.
For example, if the Repeat value is set to 5, the serial
number will count in the sequence:
11111, 22222, 33333, 44444, etc.
Reset Enter the reset value for the serial number. When the
serial number reaches this value, it will reset back to
either the Increase From or Decrease From value.
Font Select the font type.
Size Select the font size.
Minimum
Number Length
Tick the Minimum Number Length tick box, to define
the minimum number of characters for the serial
number.
To Next Page
Loading...
Need help?
General
