MAINTENANCE
EPT024619 Issue 1 June 2016 5-9
Set up Automatic Nozzle Switching using an Android device
To set up this feature using an Android device:
(1) Open the Domino Printer G20i application on the Android device.
(2) Select printer settings.
(3) Select print side.
(4) De-select the Manual mode tick box.
(5) Enter the number of times 1 nozzle bank will print before switching to
the second nozzle bank in the Auto change value text box.
(6) Select OK.
To Next Page
Loading...
Need help?
General
