INSTALLATION
EPT024619 Issue 1 June 2016 6-17
(3) Turn the G20i on.
(4) Using the wireless USB keyboard, from the printer’s main menu,
move the cursor down to highlight Operation.
(5) Press the Enter button.
(6) Move the cursor to highlight Connect PC.
(7) Press the Enter button.
(8) The PC should now detect the connection to the G20i and attempt to
install the driver software, follow the on screen instructions.
(9) If the PC does not automatically install the driver, the driver must be
installed manually. See “Manual Driver Installation” on page 6-19.
(10) Start the Domino G20i Setup programme on the PC and follow the on
screen instructions.
To Next Page
Loading...
