Doosan DISD SD 310 - Page 339

Install the two closing covers.
NOTE ;
Wet sealing surfaces with Loctite (Type-No. 270) !
( S ) Driver 5870 057 015
( S ) Handle 5870 260 002
Install brake shoes and engage return springs
Insert hex. head screws in the bores of the output
flange and press retaining plate (Arrow) against
shoulder.
Heat output flange and assemble it until contact is
obtained.
Transmission and Torque Converter SPC000007
Page 111
Figure 112
Figure 111
Figure 113
Figure 114