Fasten axle by means of hex. nuts.
Torque limit (M8/ 8.8) 23 Nm
Check end play of the clutch 0,1 ... 0,3 mm again
and correct if necessary.
( S ) Magnetic base 5870 200 055
( S ) Dial indicator 5870 200 057
( S ) Crow bar 5870 345 071
Check operation of the clutches KH and K3 by
means of compressed air.
NOTE ;
If the components are correctly installed, the closing,
resp. opening of the clutches is clearly audible !
Transmission and Torque Converter SPC000007
Page 129
To Next Page
Loading...
