Doosan DISD SD 310 - Page 447

Assemble outer and inner plates alternately, starting
with one outer plate.
NOTE ;
Quantity of outer and inner plates, see
corresponding Spare Parts List !
Oil plate pack prior to the installation !
Mount backing plate and fix plate pack by means of
circlip.
( S ) Clamping pliers 5870 900 021
Check operation of the clutch by means of
compressed air.
Squeeze rectangular ring into the annular groove
(Arrow) and engage it.
Transmission and Torque Converter SPC000007
Page 219
Figure 32
Figure 33
Figure 34
Figure 35