34 Instructions for use Babyleo TN500 SW 1.0n
Product description
3.2.2.1 Timer
The APGAR timer or stopwatch can be activated using the Timer... button in the
main menu bar.
When the APGAR timer has been started, a signal tone is emitted after one
minute, after 5 minutes, and after 10 minutes. The stopwatch counts up to
99:59 minutes.
Procedure:
1 Touch the Timer... button in the main menu bar.
The Timer dialog window is displayed.
2 Touch the APGAR or Stopwatch button.
The selected timer is displayed in the header bar.
3 To use a timer, proceed as follows:
a Touch the button next to the timer.
b Select Start, Stop, or Reset.
c To deactivate the timer, touch the Timer... button in the main menu bar.
d In the Timer dialog window, touch the timer that should be deactivated.
✓ The button turns light green. The timer disappears from the header bar.
5 Special procedures... Opens the dialog window for selecting special
procedures, e.g., warm-up or weaning (option)
or humidifier cleaning.
6 Scale... (option) Opens the dialog window for weighing the
patient.
7 Timer... Provides access to the APGAR timer and the
stopwatch. Touch the APGAR or Stopwatch
button to deselect it.
8 System setup... Opens the dialog window for configuring
device functions and entering patient data.
No. Designation Description
To Next Page
Loading...
