Dräger Fabius plus - Deactivating the O 2 Monitoring

Instructions for use Fabius plus SW 3.n 125
Monitoring
Deactivating the O2 monitoring
If Fabius is configured by DrägerService for
operation with deactivated O
2 monitoring, the
following functions of the O
2 monitoring, are
deactivated:
– Parameter field for O
2 monitoring
– Setting of O
2 alarm limits
– Calibration of O
2 sensor
– Alarm for the inspiratory O
2 concentration and
the O
2 sensor
The message No Integrated O
2 Monitoring! is
displayed in the O2 monitoring window (A).
25481
NOTE
If the internal FiO2 monitoring is deactivated, an
external FiO2 monitoring must be available in
accordance with general safety standards.
A
Volume Control