EasyManua.ls Logo

Dräger Fabius plus - Supplemental O; Functional Check of the Supplemental O 2 Delivery

Dräger Fabius plus
232 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Instructions for use Fabius plus SW 3.n 31
Overview
Supplemental O2 delivery (optional)
The supplemental O2 delivery supplies pure
oxygen with an exact metered flow, e.g., for O
2
insufflation using a face mask during a regional
anesthesia. The supplemental O
2 delivery is not
only possible in standby mode and during
operation, but also if Fabius is switched off.
The supplemental O
2 delivery can supply
additional inspiratory oxygen for the patient for the
following types of anesthesia:
Spinal anesthesia
Epidural anesthesia
Other regional anesthesia
To increase the O
2 concentration in the breathing
gas, the supplemental O
2 delivery can be used in
combination with a breathing bag
*
.
Functional check of the supplemental
O
2 delivery
Turn the flow control valve (A)
counterclockwise.
Check that the float can move freely in the flow
tube.
After the O
2 insufflation is ended, the flow control
valve of the supplementary O
2 delivery must be
completely closed:
Turn the flow control valve (A) clockwise to the
final position stop.
WARNING
Risk due to overpressure
When the patient's connection to the
supplemental O
2 delivery is made using a
breathing circuit without relief valve,
increased pressure may be applied to the
patient.
When connecting the patient, only use a
breathing circuit with relief valve or do not
connect pressure-tight.
WARNING
Risk of fire
The oxygen can ignite when cauterizing near
an oxygen source.
Make sure that all connections (e.g., Y-
piece, breathing hoses) do not leak.
Before cauterizing, close the flow control
valve.
Remove mask.
Wait a few moments.
25317
O
2
Fabius plus
A
* ASTM F1850-22(2005) §76

Table of Contents

Other manuals for Dräger Fabius plus

Related product manuals