Dräger Fabius plus - Device Combinations

Technical data
214 Instructions for use Fabius plus SW 3.n
Device combinations
This device can be operated in combination with
other Dräger devices or with devices from other
manufacturers. Observe the accompanying
documents of the individual devices.
If a device combination is not approved by Dräger,
the safety and the functional state of the individual
devices can be compromised. The operating
organization must ensure that the device
combination complies with the applicable editions
of the relevant standards for medical devices.
Device combinations approved by Dräger meet the
requirements of the following standards (as
applicable):
– IEC 60601-1, 3rd edition (general requirements
for safety, device combinations, software-
controlled functions)
– IEC 60601-1-2 (electromagnetic
compatibility)
– IEC 60601-1-8 (alarm systems)
Or:
– IEC 60601-1, 2nd edition (general
requirements for safety)
– IEC 60601-1-1 (device combinations)
– IEC 60601-1-2 (electromagnetic
compatibility)
– IEC 60601-1-4 (software-controlled
functions)
– IEC 60601-1-8 (alarm systems)