Instructions for use Fabius plus SW 3.n 137
Configuration
Accessing the alarm logbook
The alarm logbook lists all alarm messages with
the respective date and time.
Up to a maximum of 100 entries can be saved.
When the storage limit is reached, the oldest
entries will be overwritten.
1 Press the Access Alarm Log softkey (A).
2 To scroll through the alarm logbook (B), turn
the rotary knob.
Clearing the alarm logbook
Select Clear Alarm Log (C) and confirm.
Closing the alarm logbook
Select the input arrow (D) and confirm.
The screen changes to Standby mode.
2546325495
CAUTION
Risk of losing data
All data in the alarm logbook are cleared in the
following cases:
– Fabius is switched off.
– The system test is started in standby mode.
– The power supply fails.
To Next Page
Loading...
