Dräger Fabius plus - Page Standby Set-up; Changing the default settings

Instructions for use Fabius plus SW 3.n 139
Configuration
Page Standby Set-up
Pressing the key in Standby mode provides
access to various default settings and
configuration settings.
Access is password-protected. On request the
password can be deactivated or a personal
password can be defined.
The settings made are saved as default settings
and configurations.
1 Press the (A) key.
The Standby Set-up screen opens
2 Select Default Settings (B) or Configuration
(C) with the cursor.
By selecting and confirming with the input
arrow (D), the screen changes back to the
Standby screen.
Changing the default settings
1 On the Standby Set-up screen, select Default
Settings (A) and confirm.
The screen with the password query opens.
2 In the displayed row, select the digits in
sequence and confirm.
2541122103
A
Standby Set-up
B
C
D
2210322107
Standby Set-up
A
Standby Set-up
B