Dräger Fabius plus - Page 145

Instructions for use Fabius plus SW 3.n 145
Configuration
Changing the pressure unit
1 Select Pressure Unit (G) and confirm.
The following units can be selected:
– hPa
– cmH
2O
– mbar
– kPa
2 Select new unit and confirm.
The window is closed.
Activating the acoustic confirmation
When the function Acoustic Confirmation is
switched on, a tone is sounded when pressing the
rotary knob.
1 Select Acoustic Confirmation (H) and
confirm.
2 Select On or Off and confirm.
The window is closed.
22136
Standby Set-up
G
22137
Standby Set-up
H