Dräger Oxylog VE300 - Page 103

Instructions for use | Oxylog VE300 SW 1.n 103
Reprocessing
12.5.2 Surface disinfectant
At the time of the test, the surface disinfectants listed in the following table showed
good material compatibility. They can be used in addition to the surface
disinfectants listed in the section "Recommendations for reprocessing".
The manufacturers of the surface disinfectants have verified at least the following
spectra of activity:
– Bactericidal
– Yeasticidal
– Virucidal or virucidal against enveloped viruses
Observe the specifications of the surface disinfectant manufacturers.
Other surface disinfectants are used at one's own risk.
Dräger states that oxygen-releasing agents and chlorine-releasing agents may
cause color change in some materials. Color change does not indicate that the
product is not functioning correctly.
Class of active
ingredient
Surface disinfectant Manufacturer
Chlorine-releasing agents Actichlor plus Ecolab
BruTab 6S Brulin
Clorox Professional Disin-
fecting Bleach Cleaner
Clorox
Dispatch Hospital Cleaner
Disinfectant Towels with
Bleach
Klorsept 17 Medentech
Oxygen-releasing agents Descogen Liquid Antiseptica
Descogen Liquid r.f.u.
Dismozon plus Bode Chemie
Dismozon pur
Oxycide Ecolab USA
Perform Schülke & Mayr
Virkon DuPont
Quaternary ammonium
compounds
Mikrozid sensitive liquid
1)
1) Virucidal against enveloped viruses
Schülke & Mayr
Mikrozid sensitive wipes
1)
Mikrozid alcohol free liq-
uid
1)
Mikrozid alcohol free
wipes
1)
acryl-des
1)
Aldehydes Buraton 10 F Schülke & Mayr