30 Instructions for use | Oxylog VE300 SW 1.n
Operating concept
Start dialog in standby mode
If the device is in standby mode (e.g., immediately after startup), the date and
result of the last system test are displayed in the standby mode area.
28210
No. Designation
AText Standby and date of last system test or alarm message
B Step 1: Select the patient category (buttons Adult, Child)
C Step 2: Select the ventilation category (buttons CPR, Ventilation
(volume), Ventilation (pressure), CPAP)
D Step 3: Start ventilation (button Start ventilation)
To Next Page
Loading...
