Instructions for use | Oxylog VE300 SW 1.n 31
Operating concept
Ventilation dialog
The device determines MVe and VTe values under BTPS conditions.
If the values for MVe and VTe cannot be determined due to malfunctions, the
inspiratory values MVi and VTi are displayed.
28209
No. Designation
A Display of pressure bar for Paw in mbar or waveforms for Paw, Flow, CO
2
(option)
B Display of measured values for the parameters PIP, RR, MVe (option),
VTe (option), and etCO
2 (option)
C Button Alarm settings (For further information, see the following chapter:
"Setting alarm limits", page 71)
D Button More settings
E Therapy controls for frequently used parameters (depending on the venti-
lation setting, e.g., VT and RR or PEEP and Pmax). The black triangle
indicates the preset parameter value.
F Toggle symbol. By tapping in a parameter field with this symbol it is possi-
ble to change between the possible parameters.
To Next Page
Loading...
