Dräger Oxylog VE300 - Restoring Factory Settings

Instructions for use | Oxylog VE300 SW 1.n 85
Configuration
The preset alarm volume values are listed in the following table:
9.9.9 Restoring factory settings
All values set by the user will be overwritten by the factory settings. This cannot
be undone.
To restore the factory settings:
● Touch the Restore factory settings button and confirm.
Child MVe low - MVe high 2 - 8 L/min
RR high 35 /min
etCO
2 low - etCO2 high 30 - 50 mmHg /
4.0 - 6.7 kPa /
4.0 - 6.7 Vol%
etCO
2 low - etCO2 high
(only CPR)
0 - 99 mmHg /
0 - 13.2 kPa /
0 - 13.2 Vol%
Preset value for Value
Alarm volume 75 %
Minimum alarm volume 25 %
Patient category Alarm limit Value