Need help?Do you have a question about the Dräger Polytron 8000 Series and is the answer not in the manual?
General| Ingress Protection | IP66/67 |
|---|---|
| Detection Principle | Electrochemical, Infrared, Catalytic Bead |
| Gases Detected | Combustible gases, toxic gases, and oxygen |
| Display | LCD with backlight |
| Humidity Range | 0 to 99% RH (non-condensing) |
| Housing Material | Stainless steel |
| Output Signal | 4-20 mA, HART, RS-485 Modbus |
| Power Supply | 10 to 30 V DC |
| Certifications | ATEX, IECEx, CSA |
| Temperature Range | -40 °C to +65 °C (depending on sensor) |
To Previous Page
