- If the indication is “On” the instrument panel
activates the Lap Function; once it is activated, it
is possible to record the LAP time (ref. page 206);
- If the indication is “Off” the instrument panel
disabled the Lap function;
- If the indication is “Lap Data”, the instrument
panel shows the memorised LAPs (ref. to
paragraph “Displaying the stored LAPs”);
- If the indication is “Erase All”, the instrument
panel erases all memorised LAPs (ref. to
paragraph “Erasing the stored LAPs”).
Note
In the event of an interruption of the power
supply from the battery, when power is restored at
the next Key-On, the system sets the LAP function
automatically to the “Off” mode.
To exit the menu and go back to previous page
highlight the "
Back" indication and press button
(4).
147
To Next Page