Displaying the stored Laps
The LAPs previously stored can be displayed. The
information displayed is lap time, maximum rpm and
top speed.
To view the LAPs, enter the SETTING MENU, use
buttons (1) and (2) to select "Lap" and press button (4).
Then use buttons (1) and (2) to select “Lap Data” and
press button (4).
If there are no memorised LAPs, when accessing this
page the instrument panel will show “◄Back” and
“No Lap”.
Lap Data
Erase All
On
Back
Off
...
42
1
Fig. 93
Fig. 94
148