Settings via the software
Operating Instructions 878-M PREMIUM - 02.0 - 02/201884
Programming mode offers two options for creating new seam
programs:
• Creating a program by keyboard input
• Creating a program by teach-in
Thread tension value (%) for the current section
(only for electronic tension plate)
Value range: 0 to 99
•Use
/to select the Thread tension parameter.
•Use
/ to change the thread tension.
Top roller pressure
Value range: 1 to 14
•Use
/ to select the Top roller pressure parame-
ter.
•Use
/ to change the top roller pressure
Difference feed between top roller and wheel feeder
Value range: 0 to 16 (increments 1)
•Use
/ to select the Difference feed parameter.
•Use +/- to select difference sense
Use
/ or numeric keys to change the difference
value
Number of stitches /
length of the current section in mm
Symbol Meaning
To Next Page
Loading...
