DxO ONE - User Guide - Copyright © DxO Labs 1999-2015 - All rights reserved 88
Remote Control
Disconnecting and reconnecting the DxO ONE
Disconnecting the DxO ONE when it’s in energy-saver mode
Depending on how you configure your shooting settings, the DxO ONE switches to energy-saver mode after 30
seconds, 2 minutes, or 5 minutes. The Wi-Fi connection remains active, however, and you can instantly wake up
the DxO ONE with a simple tap on the screen or by pressing the camera shutter.
However, the Wi-Fi connection is cut when your iPhone goes into standby. Your DxO ONE will wait for the
connection to be reestablished, which must be done through the iPhone. If the camera is not reconnected to the
Wi-Fi, it will shut off automatically if:
Battery charge at 50% or less—the camera waits to be reconnected for 5 minutes and then turns off
●
Battery charge above 50%—the camera waits to be reconnected as long as the battery is above 50%
●
Camera is plugged into a power source—the DxO ONE waits to be reconnected indefinitely
●
Reconnecting the DxO ONE after it goes into standby
Bring the iPhone out of sleep mode.1.
Open the application, which is in Gallery mode.2.
Touch the Capture button located on the bottom to reestablish the connection.3.
The connection is reestablished after a few seconds.4.
Reconnecting the DxO ONE to a Wi-Fi network after the ONE has turned off
Bring the iPhone out of sleep mode.1.
Turn your DxO ONE back on, and wait for it to reconnect to your Wi-Fi network.2.
Open the application, which is in Gallery mode.3.
Touch the Capture button located on the bottom to reestablish the connection.4.
The connection is reestablished after a few seconds.5.
Reconnecting the DxO ONE to a Wi-Fi Direct network after the ONE has turned
off
Bring the iPhone out of sleep mode.1.
Turn your DxO ONE back on, and wait for it to restart its Wi-Fi server.2.
Connect your iPhone to the camera's Wi-Fi network.3.
Open the application, which is in Gallery mode.4.
Touch the Capture button located on the bottom to reestablish the connection.5.
The connection is reestablished after a few seconds. 6.
To Next Page
Loading...
