DxO ONE - User Guide - Copyright © DxO Labs 1999-2015 - All rights reserved 27
Stand-alone capture modes
Taking a picture
1. Hold the camera so that the lens is pointing at your subject and that the shutter button is on the top side of
the camera. Take care not to accidentally put your finger in front of the lens when taking the photo.
2. If you want to use the framing assistant, sweep the screen from the bottom to the top.
3. Half press the shutter button to obtain focus.
4. The focus indicator dot, displayed between the photo count and File Type indicators on the OLED screen,
stops blinking when focus is achieved.
To Next Page
Loading...
