Dynapac CC722 - Driving Near Edges

Safety - when operating
4812158801_E.pdf 2018-04-03
Driving near edges
Never operate with roller outside the edge, if the
substrate does not have full bearing strength or is
close to a slope.
Never operate with roller outside the edge, if the
substrate does not have full bearing strength or is
close to a slope.
Keep in mind that the machine's center of gravity
moves outwards when steering. For example, the
center of gravity moves to the right when you steer
to the left.
Keep in mind that the machine's center of gravity
moves outwards when steering. For example, the
center of gravity moves to the right when you steer
to the left.
8