Dynapac CC722 User Manual

Maintenance - Maintenance schedule
4812158801_E.pdf 2018-04-03
Every 500 / 1500 hours of operation
Refer to the contents to find the page number of the
sections referred to !
Pos.
in fig
Action CommentPos.
in fig
Action Comment
14 Clean the outside of the hydraulic fluid cooler/water
cooler
If necessary14 Clean the outside of the hydraulic fluid cooler/water
cooler
If necessary
15 Check belt tension for cooling fan and alternator Refer to the engine manual15 Check belt tension for cooling fan and alternator Refer to the engine manual
Check the oil level in the pump driveCheck the oil level in the pump drive
16 Check the oil level in the drum drive16 Check the oil level in the drum drive
6 Check the oil level in the drums6 Check the oil level in the drums
17 Lubricate controls and joints17 Lubricate controls and joints
20 Replace the engine fuel filter Refer to the engine manual20 Replace the engine fuel filter Refer to the engine manual
19 Change the engine oil and oil filter Refer to the engine manual19 Change the engine oil and oil filter Refer to the engine manual
Every 1000 hours of operation
Refer to the contents to find the page number of the
sections referred to !
Pos.
in fig
Action CommentPos.
in fig
Action Comment
14 Clean the outside of the hydraulic fluid cooler/water
cooler
If necessary14 Clean the outside of the hydraulic fluid cooler/water
cooler
If necessary
15 Check belt tension for cooling fan and alternator Refer to the engine manual15 Check belt tension for cooling fan and alternator Refer to the engine manual
Check the oil level in the pump driveCheck the oil level in the pump drive
16 Check the oil level in the drum drive16 Check the oil level in the drum drive
6 Check the oil level in the drums6 Check the oil level in the drums
17 Lubricate controls and joints17 Lubricate controls and joints
20 Replace the engine fuel filter Refer to the engine manual20 Replace the engine fuel filter Refer to the engine manual
19 Change the engine oil and oil filter Refer to the engine manual19 Change the engine oil and oil filter Refer to the engine manual
Check engine valve clearances Refer to the engine manualCheck engine valve clearances Refer to the engine manual
15 Check the engine belt drive system Refer to the engine manual15 Check the engine belt drive system Refer to the engine manual
10 Change the hydraulic fluid filter10 Change the hydraulic fluid filter
18 Replace the main filter in the air cleaner18 Replace the main filter in the air cleaner
3 Drain condensate from fuel tank3 Drain condensate from fuel tank
12 Drain condensate from hydraulic reservoir12 Drain condensate from hydraulic reservoir
66

Dynapac CC722 Specifications

General

Brand	Dynapac
Model	CC722
Category	Construction Equipment
Language	English