Operation
4812158801_E.pdf2018-04-03
Switching off
1
2
3
4
Fig. Instrument panel
1. Ignition lock
2. Speed switch
3. Parking brake knob
4. Forward/reverse lever
Turn the speed switch back to idling (left position),
allow the engine to idle a few minutes to cool down.
Check instruments and warning lamps to see if any
faults are indicated. Switch off all lights and other
electrical functions.
Activate the parking brake with the parking brake
switch in right position (3).
Turn the ignition lock (1) to the left position and
remove the ignition key. Lower and lock the instrument
cover.
Parking
Chocking the drums
Fig. Positioning
1. Chocks
1
Never disembark from the machine when the is
engine running, unless the parking brake is
activated.
Never disembark from the machine when the is
engine running, unless the parking brake is
activated.
Make sure that the roller is parked in a safe place
with respect to other road users. Chock the drums
if the roller is parked on sloping ground.
Make sure that the roller is parked in a safe place
with respect to other road users. Chock the drums
if the roller is parked on sloping ground.
Keep in mind that there is a risk of freezing
during the winter. Check the anti-freeze in the
diesel engine and the screenwash bottle in the
cab. Drain the water tanks, sprinkler pumps and
water lines.
Keep in mind that there is a risk of freezing
during the winter. Check the anti-freeze in the
diesel engine and the screenwash bottle in the
cab. Drain the water tanks, sprinkler pumps and
water lines.
49
To Next Page
Loading...
Need help?
General
