EasyManuals Logo

Dynapac CC722 User Manual

Dynapac CC722
101 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #35 background imageLoading...
Page #35 background image
Machine description
4812158801_E.pdf2018-04-03
14 Warning lamp, Air filter 37 Fuse boxes14 Warning lamp, Air filter 37 Fuse boxes
15 Warning lamp, Hydraulic fluid filter 38 Engine diagnostics15 Warning lamp, Hydraulic fluid filter 38 Engine diagnostics
16 Horn 39 Browse through engine error codes16 Horn 39 Browse through engine error codes
17 Driving lights 40 Fault indicating lamp (Yellow), less serious fault17 Driving lights 40 Fault indicating lamp (Yellow), less serious fault
18 Full/Dipped beam 41 Fault indicating lamp (Red), serious fault18 Full/Dipped beam 41 Fault indicating lamp (Red), serious fault
19 Direction indicator 42 > Information lamp, Delayed regeneration19 Direction indicator 42 > Information lamp, Delayed regeneration
20 Hazard indicators 43 > Regeneration switch with built-in lamp20 Hazard indicators 43 > Regeneration switch with built-in lamp
21 Working lights backwards 44 > Warning lamp, High exhaust temperature21 Working lights backwards 44 > Warning lamp, High exhaust temperature
22 * Rotating beacon22 * Rotating beacon
23 Sprinkler switch, Man/Off/Auto23 Sprinkler switch, Man/Off/Auto
* = Option > = DPF filter, emissions system* = Option > = DPF filter, emissions system
Function descriptions
No Designation Symbol FunctionNo Designation Symbol Function
1 Ignition lock Position P-0: Shut off position, key can be removed.1 Ignition lock Position P-0: Shut off position, key can be removed.
Position I-II: All instruments and electric controls are
supplied with power.
Glowing occurs, the starter can be activated when the
lamp for glowing on the indicator panel goes out.
Position I-II: All instruments and electric controls are
supplied with power.
Glowing occurs, the starter can be activated when the
lamp for glowing on the indicator panel goes out.
Position III: Starter motor activation.Position III: Starter motor activation.
2 Emergency stop When pressed, the emergency stop is activated. The
brakes are applied and the engine stops. Brace yourself
for a sudden stop.
NOTE: When starting the machine, the emergency stop
must be inactive.
2 Emergency stop When pressed, the emergency stop is activated. The
brakes are applied and the engine stops. Brace yourself
for a sudden stop.
NOTE: When starting the machine, the emergency stop
must be inactive.
3 Parking brake In the right position, the parking brake is activated.
NOTE: When starting the machine, the parking brake
must be activated.
3 Parking brake In the right position, the parking brake is activated.
NOTE: When starting the machine, the parking brake
must be activated.
4 Speed switch, diesel engine Left position produces idling speed
Middle position produces loading/unloading speed
Right position produces working/transport speed
NOTE: When starting the machine, the speed switch must
be in the left position.
4 Speed switch, diesel engine Left position produces idling speed
Middle position produces loading/unloading speed
Right position produces working/transport speed
NOTE: When starting the machine, the speed switch must
be in the left position.
5 Indicator lamp, electric heater diesel
engine (Yellow)
Illuminates when the electric heater is active.
The heater is normally activated when ignition is on.
When the lamp turms off is the engine ready for start.
For optimized engine emission is the heater activated
when necessary even after the diesel engine has started.
When this happens, normally the system voltage drops to
a level where the charge lamp (8) lights up.
5 Indicator lamp, electric heater diesel
engine (Yellow)
Illuminates when the electric heater is active.
The heater is normally activated when ignition is on.
When the lamp turms off is the engine ready for start.
For optimized engine emission is the heater activated
when necessary even after the diesel engine has started.
When this happens, normally the system voltage drops to
a level where the charge lamp (8) lights up.
6 Hourmeter Displays the diesel engine's operating time in hours.6 Hourmeter Displays the diesel engine's operating time in hours.
7 Fuel gauge Shows level in the fuel tank.7 Fuel gauge Shows level in the fuel tank.
27

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dynapac CC722 and is the answer not in the manual?

Dynapac CC722 Specifications

General IconGeneral
BrandDynapac
ModelCC722
CategoryConstruction Equipment
LanguageEnglish

Related product manuals