EasyManuals Logo

Dynapac CC722 User Manual

Dynapac CC722
101 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #60 background imageLoading...
Page #60 background image
Long-term parking
4812158801_E.pdf 2018-04-03
Hydraulic reservoir
Fill the hydraulic reservoir to the uppermost level mark
(see under the heading ‘Every 10 hours of operation.’)
Steering cylinder, hinges, etc.
Lubricate the steering joint bearings and both bearings
on the steering cylinder with grease (see under the
heading 'Every 50 hours of operation').
Grease the steering cylinder piston with conservation
grease.
Grease the hinges on the doors to the engine
compartment and the cab. Grease both ends of the
forward/reverse control (bright parts) (see under the
heading 'Every 500 hours of operation').
Hoods, tarpaulin
* Lower the instrument cover over the instrument
panel.
* Cover the entire roller with a tarpaulin. A gap must
be left between the tarpaulin and the ground.
* If possible, store the roller indoors and ideally in a
building where the temperature is constant.
52

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dynapac CC722 and is the answer not in the manual?

Dynapac CC722 Specifications

General IconGeneral
BrandDynapac
ModelCC722
CategoryConstruction Equipment
LanguageEnglish

Related product manuals