Operation
4812158801_E.pdf 2018-04-03
1
3
2
Fig. Operator's seat
1. Locking lever - length adjustment
2. Backrest incline
3. Weight adjustment
Operator’s seat - Adjusting
Adjust the operator’s seat so that the position is
comfortable and so that the controls are within easy
reach.
The seat can be adjusted as illustrated.
Always make sure that the seat is secure before
beginning operation.
Always make sure that the seat is secure before
beginning operation.
Interlock
The roller is equipped with Interlock.
The engine switches off 4 seconds after the operator
rises from the seat.
The engine stops whether the forward/reverse lever is
in the neutral or the drive position.
The engine does not stop if the parking brake is
activated.
Sit down for all operations!Sit down for all operations!
40
To Next Page
Loading...
Need help?
General
