Name: Dynapac CC722
Brand: Dynapac
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Table of Contents3
Introduction9
The Machine9
Intended Use9
Warning Symbols9
Safety Information9
General10
CE Marking and Declaration of Conformity11
Safety - General Instructions13
Safety - When Operating15
Work Driving15
Driving Near Edges16
Safety (Optional)17
Air Conditioning (Optional)17
Special Instructions19
Standard Lubricants and Other Recommended Oils and Fluids19
Higher Ambient Temperatures, above +40°C (104°F)19
Lower Ambient Temperature - Freeze Risk19
Temperatures19
High Pressure Cleaning19
Fire Fighting20
Roll over Protective Structure (ROPS), ROPS Approved Cab20
Battery Handling20
Jump Starting21
Technical Specifications23
Vibrations - Operator Station23
Noise Level23
Slopes23
Dimensions, Side View24
Dimensions, Top View25
Weights and Volumes26
- Working Capacity26
- General27
- Hydraulic System27
- ROPS - Bolts27
- Tightening Torque28
Machine Description29
- Identification29
- Decals31
  - Safety Decals32
  - Info Decals33
- Instruments/Controls34
Operation47
- Before Starting47
- Starting52
  - Starting the Engine52
- Driving53
  - Operating the Roller53
  - Interlock/Emergency Stop/Parking Brake - Check54
- Vibration55
- Braking56
  - Reserve Brake56
  - Switching off57
- Parking57
  - Chocking the Drums57
  - Master Switch58
Long-Term Parking59
- Engine59
- Battery59
- Air Cleaner, Exhaust Pipe59
- Sprinkler System59
- Fuel Tank59
- Hydraulic Reservoir60
- Steering Cylinder, Hinges, Etc60
- Hoods, Tarpaulin60
Miscellaneous61
- Lifting61
- Towing/Recovering62
Operating Instructions - Summary65
Preventive Maintenance67
- Acceptance and Delivery Inspection67
- Warranty67
Maintenance - Lubricants and Symbols69
- Maintenance Symbols70
Maintenance - Maintenance Schedule71
- Service and Maintenance Points71
- General72
- Every 10 Hours of Operation (Daily)72
- After the FIRST 50 Hours of Operation73
- Every 50 Hours of Operation (Weekly)73
- Every 250 / 750 / 1250 / 1750 Hours of Operation73
- Every 500 / 1500 Hours of Operation74
- Every 1000 Hours of Operation74
- Every 2000 Hours of Operation75
Maintenance, 10H77
- Diesel Engine Check Oil Level77
- Coolant Level - Check78
Water Separator - Drainage78
Brakes - Check79
Sprinkler System - Check, Cleaning79
Nozzle - Dismantling/Cleaning80
Scrapers - Check, Adjustment80
Hydraulic Reservoir, Level Check - Filling81
Water Tanks - Filling81
Fuel Tank - Filling82
Maintenance - 50H83
Air Cleaner83
Checking - Change the Main Air Filter83
Backup Filter - Change84
Air Cleaner - Cleaning84
Rubber Elements and Fastening Screws - Check85
Articulation and Steering Cylinder - Lubrication85
Hydraulic Reservoir - Check/Venting86
Battery86
Checking the Electrolyte Level86
Battery Cell87
Maintenance Measures - 250 H89
Pump Drive - Oil Level, Check - Filling89
Drum Drive - Checking the Oil Level90
Maintenance Measures - 500 H91
Drum - Checking the Oil Level91
Controls and Moving Joints - Lubrication92
Maintenance - 1000H93
Hydraulic Fluid Filter - Replacement93
Air Filter - Change94
Backup Filter - Change94
Fuel Tank - Drainage95
Hydraulic Fluid Reservoir - Draining96
Maintenance - 2000H97
Hydraulic Reservoir - Replacing the Fluid/Filters97
Drum - Changing the Oil98
Drum Drive - Changing the Oil99
Pump Drive - Changing the Oil100

Brand	Dynapac
Model	CC722
Category	Construction Equipment
Language	English

Dynapac CC722 User Manual

Table of Contents

Questions and Answers:

Dynapac CC722 Specifications

Related product manuals