Model 200i and 250i Motorcycle Dynamometer Installation Guide
5-1
C HAPTER
5
B
ASIC
D
YNO
O
PERATION
This chapter includes instructions for basic dyno operation. For more detailed
instructions, refer to the WinPEP 7 User Guide. This manual can be found on your
WinPEP CD or at www.dynojet.com.
This chapter is divided into the following categories:
•Loading the Bike, page 5-2
• Connecting the RPM Pickup, page 5-4
•Pre-Run Inspection, page 5-9
• Making a Test Run, page 5-11
• Preventative Maintenance, page 5-12
To Next Page
Loading...
