CHAPTER 5
Using the Starter
Above Ground Model 250i Motorcycle Dynamometer Installation Guide
5-12
USING THE STARTER
The starter allows you to use the momentum of the drum to start motorcycles that are
not equipped with an on-board starting system.
1 Make sure the motorcycle is in neutral or the clutch is in.
2 Press and hold the starter button to spin the drum. Hold the starter button until
the drum reaches maximum speed then release the starter button.
3 Use the momentum of the drum to start the bike.
USING THE DYNO
With the bike properly loaded and secured, you are now ready to begin making runs
and using your dyno. From here you will need to refer to the Power Core Help for
detailed information on using the Power Core suite of applications.
To Next Page
Loading...
Need help?
General
