Easy xLogic SuperRelay - Modification Methods of System Time

User’s Manual xLogic SuperRelay
103
Note: Up to 31 expansion modules can be linked together.
You shall first select the FUNCTION PAGE.(read 4.2)
1. Move the cursor to “Set adr”: Press or key.
2. Confirm “Set adr” :Press OK key.
3. Move the cursor to the place of parameter to be modified: press or key.
6. Modify value: press
or key.
7. Confirm the value after modification: press OK key.
4.2.5 Modification Methods of System Time
You should first select the FUNCTION PAGE.(read 4.2)
1. Move the cursor to “Clock”: Press
or key.
2. Confirm “Clock” :Press OK key.