xLogic SuperRelay User’s Manual
Select “Old” and input primary password (in our instance is “1234”), the process is the
same as the step 3 to step 10 mentioned above.
LCD displays as follows:
Input nothing under the “New”, and let it keep blank to clear password.
5. Confirm “blank” password: press OK key. Now you have cleared password and
return to main menu. If you want to set password next time ,the LCD will display:
Note:
This action (removal) make password alert be prohibited , so your program can be
reserved without password.
If users input wrong password and press OK key, xLogic doesn’t enter edit page and
return to main page. This process repeats again and again until you input the correct
password.
4.2.4 Set Address of expansion module
You may set expansion module address to realize communication with main module of
xLogic.
To Next Page
Loading...
Need help?
General