Easy xLogic SuperRelay User Manual

User’s Manual xLogic SuperRelay
5
Contents
1. General Introduction to xLogic 8
2.
Installation/remove xLogic 18
2.1 DIN rail mounting
19
2.2 Wiring the xLogic
20
2.2.1Connecting the power supply
20
2.2.2 Connecting xLogic inputs
21
2.2.3 Connecting xLogic outputs
24
3.
Programming xLogic 26
3.1 General Input & Output functions
26
3.1.1 Inputs
26
3.1.2 Cursor keys
27
3.1.3 Outputs
27
3.1.4 Permanent logical levels HI and LO
27
3.1.5 Shift register bits
27
3.1.6 Analog inputs
28
3.2 Basic functions list – GF
29
3.2.1 AND
29
3.2.2 AND with edge evaluation
31
3.2.3 NAND
31
3.2.4 NAND with edge evaluation
32
3.2.5 OR
33
3.2.6 NOR
34
3.2.7 XOR
35
3.2.8 NOT
35
3.3 Basics on special functions
35
3.3.1 Designation of the inputs
36
3.3.2 Time response
37
3.3.3 Backup of the real-time clock
38
3.3.4 Retentivity
38
3.3.5 Parameter protection
39
3.3.6 Calculating the gain and offset of analog values
39
3.4 Special functions list – SF
41
3.4.1 On-delay
41
3.4.2 Off-delay
43
3.4.3 On-/Off-delay
44
3.4.4 Retentive on-delay
46
3.4.5 Wiping relay (pulse output)
47
3.4.6 Edge triggered wiping relay
48
3.4.7 Asynchronous pulse generator
49
3.4.8 Random generator
50
3.4.9 Stairway lighting switch
52
3.4.10 Multiple function switch
53
3.4.11 Weekly timer
55
3.4.12 Yearly timer
57
3.4.13 Up/down counter
60

Easy xLogic SuperRelay Specifications

General

Brand	Easy
Model	xLogic SuperRelay
Category	Computer Hardware
Language	English