Easy xLogic SuperRelay User Manual

User’s Manual xLogic SuperRelay
117
You can invert output Q3 to use output messages at Q4. Relay Q4 only drops out if main
power is lost or if there is a fault in the system. The output can then be used for a remote
message.
5.4 Factory door
Requirements for a gate control system
In many cases a factory entrance is closed with roll gates. Those gates are only opened
when vehicles need to enter or leave the factory grounds. The gate is controlled by the
porter.

Easy xLogic SuperRelay Specifications

General

Brand	Easy
Model	xLogic SuperRelay
Category	Computer Hardware
Language	English