xLogic SuperRelay
Users Manual
Qualified Personnel
The device/system may only be set up and used in conjunction with this
documentation. Commissioning and operation of a device/system may only be
performed by qualified personnel. Within the context of the safety notices in this
documentation qualified persons are defined as persons who are authorized to
commission, ground and label devices, systems and circuits in accordance with
established safety practices and standards.
Prescribed Usage
Note the following:
Warning
This device and its components may only be used for the applications described
in the catalog or the technical description, and only in connection with devices
or components from other manufacturers which have been approved or
recommended by EASY. Correct, reliable operation of the product requires
proper transport, storage, positioning and assembly as well as careful operation
and maintenance.
Trademarks
All names identified by xLogic are registered trademarks of the EASY. The
remaining trademarks in this publication may be trademarks whose use by third
parties for their own purposes could violate the rights of the owner.
Copyright Easy 2007 all rights reserved
The distribution and duplication of this document or the utilization and
transmission of its contents are not permitted without express written
permission. Offenders will be liable for damages. All rights, including
rights created by patent grant or registration of a utility model or design,
are reserved.
Disclaim of Liability
We have reviewed the contents of this publication to ensure consistency with the
hardware and software described. Since variance cannot be precluded entirely, we
cannot guarantee full consistency. However, the information in this publication is re-
viewed regularly and any necessary corrections are included in subsequent editions.
To Next Page
Loading...
Need help?
General