Easy xLogic SuperRelay User Manual

User’s Manual xLogic SuperRelay
123
 B1(make contact) Daylight control switch
Circuit diagram by xLogicsoft:
Benefits:
 While power consumption of load does not exceed output of switch’s voltage range,
lamp can be directly connected to xLogic main module, however, if power
consumption of load exceeds output of switch’s voltage range, then power contactor
would be required.
 You can connect directly lightness sensitivity switch to the input of xLogic.
 Don’t need external timer, as this function has been integrated in xLogic.
 It can be installed in a small-sized cabinet, so quite space-saving.
 Less equipment
 Quite easier to modify lighting system
 According to your demand, you may setup supplementary on/off timing (lamp can
be switched off in order at the end of day.
 Easier to apply role of lightness sensitivity switch to lamp or already modified lamp

Easy xLogic SuperRelay Specifications

General

Brand	Easy
Model	xLogic SuperRelay
Category	Computer Hardware
Language	English