Eaton EMR-3MP0 - Slot X120 - PC Interface

2.2.12
Slot X120 - PC Interface
There is an USB interface of type “Mini-B” located at the front panel of the EMR-3MP0.
This interface can be used to connect the EMR-3MP0 to a PC, so that the operating
software PowerPort-E can be used for con󰊎guration and data analysis.
B1, B2 und B3 Housing
X120
E_F61
Fig. 34: USB-Interface for Parameter Setting and Evaluation Software - X120
102 www.eaton.com EMR-3MP0
2 Hardware
2.2 EMR-3MP0 – Installation and Wiring