Eaton EMR-3MP0 - Overview of Slots - Assembly Groups

2.2.3
Overview of Slots – Assembly Groups
WARNING!
In line with the customer’s requirement the devices are combined in a modular way (in
compliance with the order code). In each of the slots an assembly-group may be
integrated. In the following the terminal assignment of the individual assembly-groups are
shown. The exact installation place of the individual modules can be learned from the
connection diagram 󰊎xed at the top of your device.
Front Side
The front side of the EMR-3MP0 equipped with a USB interface, that can be used to
establish a connection with the setting software PowerPort-E.
• Slot X120
Rear Side
Slot3Slot1 Slot2
E_F89
X2 X3
X100
X101
X103
X1
Fig. 8: B1 housing – schematic diagram
Slot X1 Slot X2 Slot X3
Slot X100 Slot X101 Slot X103
65www.eaton.comEMR-3MP0
2 Hardware
2.2 EMR-3MP0 – Installation and Wiring