Eaton EMR-3MP0 User Manual

Option 2: Connecting a Module Input with a Digital Input
Call a module. Within this module assign a Digital Input onto a module input.
Example: A protection module should be blocked depending on the state of a Digital
Input. For this assign onto the blocking input within the Global Parameters the Digital
Input (e. g. »ExBlo1«).
Checking the Assignments of a Digital Input
In order to check the targets that a Digital Input is assigned to please proceed as follows:
Call up menu [Device Para / Digital Inputs].
Navigate to the Digital Input that should be checked.
At the HMI:
A multiple assignment, that means if a Digital Input is used more than once (if it is
assigned to multiple targets), this will be indicated by an ellipsis ”...” next to a Digital
Input. Call up this Digital Input by Softkey »Arrow right« in order to see the list of targets
of this Digital Input.
107www.eaton.comEMR-3MP0
2 Hardware
2.3 Input, Output and LED Settings

Eaton EMR-3MP0 Specifications

General

Brand	Eaton
Model	EMR-3MP0
Category	Relays
Language	English