Part 3: Information depending on the protection device
Measured Values Various measuring values at the time of tripping (or delayed depending
on parameter setting) will be displayed.
The set of data depends on the measuring values that are available with
the particular device.
How to Navigate Within the Fault Recorder
Navigation within the Fault recorder Softkey
Back to overview. ◀
Next (upper) item within this fault record. ▲
Previous fault record. ▶▶▎
Next (lower) item within this fault record. ▼
How to Read Out the Fault Recorder at the Panel
In order to read out a fault record there are two options available:
• Option 1: A Fault has popped up on the HMI (because a trip or pickup has occurred).
• Option 2: Call up the Fault recorder menu manually.
Option 1 (in case a fault record pops up on the display (overlay):
•
Analyze the fault record by using Softkeys “▲” and “▼”.
• Or close the Pop-up by using the Softkey OK.
Option 2:
• Enter the menu branch [Operation / Recorders / Fault rec].
•
Select a fault record.
• Analyze the fault record by using Softkeys “▲” and “▼”.
203www.eaton.comEMR-3MP0
5 Recorders
5.2 Fault Recorder
To Next Page
Loading...
