Eaton EMR-3MP0 - Page 23

Motor Relay
EMR-3MP0 ‑2 # # # # #
Modbus TCP + DNP3.0 TCP/UDP (Fiber optic interface,
LC connector, 100MB)
L
Modbus RTU + DNP3.0 RTU (RS485 /
terminals) + IEC 61850 + Modbus TCP + DNP3.0
TCP/UDP (Ethernet 100MB, RJ45)
T
Conformal Coating Options
Conformal Coated Circuit Boards B
Mounting Options
Standard Mount 0
Projection Panel Mount 1
Example
The catalog number identi󰊎cation table de󰊎nes the electrical characteristics and
operation features included in the EMR-3MP0. For example, if the catalog number were
EMR-3MP0‑2A0BB1, the device would have the following:
EMR-3MP0
• -2 – Fixed catalog number
• (A) – 4 DI, 4 Outputs, Removable Terminals, 1 4…20 mA Analog Output, URTD
interface, IRIG‑B, small display.
• (0) –Phase Current 5 A, Ground Current 5 A, Power Supply Range: 19-300 Vdc,
40-250 Vac.
•
(B) – Modbus RTU + DNP3.0 RTU (RS485 / terminals)
• (B) – Conformal Coated Circuit Boards
• (1) – Projection Panel Mount
23www.eaton.comEMR-3MP0
1 EMR‑3MP0 Motor Protection Relay
1.2 Information About the Device